Diamond Foundry, a company that grows diamonds in a lab, said it has produced a 200mm single-crystal diamond wafer, a disc the size that semiconductor fabs use for older process nodes, Tom's Hardware reported. The company framed the result as the start of a wafer-scale era for the material, which it wants to sell as a heat spreader under and around power-hungry AI processors.

Diamond conducts heat far better than copper, by a factor the company puts at five or more, and it is an electrical insulator. That combination is what makes it interesting for chip packaging: it can pull heat away from a die without shorting anything. The 200mm disc is also single-crystal rather than polycrystalline, which is the harder form to grow and the one that carries heat most cleanly.

There is a caveat in the announcement. The sample shown is unpolished, so it still needs processing before a chipmaker could use it. Diamond Foundry also published a roadmap that puts a 300mm single-crystal wafer, the size used at leading nodes, somewhere before 2030.

Twenty five years of failed attempts

The company was founded in 2012, but its statement credits work that goes back further. "Stefan and Martin pursued this goal for 25 years," chief executive Martin Roscheisen said, referring to a colleague and himself. "They kept going when the prevailing view was that single-crystal diamond simply could not be made at this scale."

Roscheisen described the milestone as the accumulated result of experiments, failures, rebuilt machines and insights across more than a decade, and said hundreds of engineers, scientists and technicians contributed. The point of the framing is scale. Single-crystal diamond has been made in small pieces for years, and the industry problem has been growing it wide enough, and then flat enough, to sit in a packaging line.

That problem is now a thermal one. Accelerators for AI training draw hundreds of watts each and are stacked into racks that push against cooling limits, which is why the industry has been rewriting the plumbing around them. The near-term fixes are liquid cooling and bigger cold plates; a diamond layer would attack the same problem at the die.

Other companies are circling the same gap

Diamond Foundry is not alone in betting on synthetic diamond as a thermal material. Akash Systems won $18.2 million in CHIPS Act funding in 2024 to produce gallium nitride fused with synthetic diamond, a combination it says cuts temperatures by 20 degrees Celsius. De Beers is developing a copper-plated diamond composite for AI, high performance computing and gallium nitride radio devices. Frore Systems, known for a solid-state cooler, has moved into diamond-infused cold plates aimed at Nvidia's next generation of accelerators.

The demand side has its own constraint. Chips can be cooled more aggressively, but the buildings around them still need power and permits, and local opposition has delayed about 2.3 of the 38 gigawatts scheduled to come online in 2027. Efficiency at the package level reduces what a site has to deliver, which is part of why materials work attracts capital now.

Diamond wafers also sit at the far end of a supply chain that is being rebuilt piece by piece. The same week, a Chinese vendor showed a 15-watt extreme ultraviolet light source and did not switch it on, a reminder that announcements in this industry often arrive well before anything ships in volume. Diamond Foundry's disc is unpolished and its 300mm target is four years out. The claim worth watching is not the diameter. It is whether a polished wafer reaches a packaging line, and what it costs per square centimetre when it does.